LoChamp Help You Set Up Animal Feed Mill Plant

Main Feed Mill Machine

• 

  -- Pre-cleaner --

  The raw materials will be first put into the pre-cleaner to remove the stones,clods and ropes etc. from them,and the go to the permanent magnetic tube to remove the iron part.The Cleaning machine will help you to get the clean material and ensure that there’s no unexpected impurities to damage the following feed equipment.

• 

  -- Conveying Machine --

  Generally,we can divide the raw materials into two parts:one need to be crushed,the other need not.So when we feed material to the feed production line,we will first separately feed them to different channels: particle materials go through feeding port to the feed grinder,mash materials go through feeding port to the feed mixer directly.

• 

  -- Feed Grinder --

  Generally,we can divide the raw materials into two parts:one need to be crushed,the other need not.So when we feed material to the feed production line,we will first separately feed them to different channels: particle materials go through feeding port to the feed grinder,mash materials go through feeding port to the feed mixer directly.

• 

  -- Feed Mixer --

  After crushing, all materials are mixed together in the feed mixer.Usually the volume of the bin for mixer,mixer and the buffer bin are all the same to ensure the mixer can work continuously batch after batch.

• 

  -- Pellet Mill --

  Pellet mill will form the mash feed into pellet feed.Usually we use ring die pellet mill for feed production line,by changing different ring dies of the pellet mill we can make pellets of different sizes for different animals.

• 

  -- Cooler --

  As we have add steam to the pellet mill,the pellet out from the pellet mill will be about 80℃,moisture 15%-16%,not suitable to pack,so we need to cool them.
  Fan,cyclone,airlock and necessary pipes form a system to provide airflow for the counter-flow cooler,pellet feed will be cooled in the cooler and discharged. After cooling,the temperature of the pellet will be about 2-3℃ above the room temperature and with 13% moisture more or less.

• 

  -- Crumble --

  Usually we will add crumble under the cooler.If we are to make small pellet,directly making it from the pellet mill will reduce the capacity of the whole plant and cost more energy,we can first make bigger pellet and then send it to crumble to make it smaller.

• 

  -- Bagging Machine --

  Ready feed need to be packed. They can be manual or automatic bagging depends on requirement.